Appendix C. Systemguard Remote Operation Configuration; Terminal Configuration - IBM R30 Operator's Manual

Appendix C. SystemGuard Remote Operation
Configuration
To use the remote operation capabilities of SystemGuard and also allow console mirroring,
you must have flags, parameters and tty configurations properly enabled. Below, are tty0
and tty1 settings, sample modem files and all the parameters that are necessary to allow
remote operations.

Terminal Configuration

The configuration of the tty0 for the S1 port looks similar to the following:
[TOP]
TTY
TTY type
TTY interface
Description
Terminal
Status
Location
Parent adapter
PORT number
Enable LOGIN
BAUD rate
PARITY
BITS per character
Number of STOP BITS
TIME before advancing to next port setting [0]
TERMINAL type
FLOW CONTROL to be used
OPEN DISCIPLINE to be used
STTY attributes for RUN time
STTY attributes for LOGIN
LOGGER name
STATUS of device at BOOT time
TRANSMIT buffer count
RECEIVE trigger level
STREAMS modules to be pushed at OPEN time
INPUT map file
OUTPUT map file
CODESET map file
[Entry Fields]
tty0
tty
rs232
Asynchronous
Available
00–00–S1–00
sa0
[s1]
disable
[9600]
[none]
[8]
[1]
[dumb]
[xon]
[dtropen]
[hupcl,cread,brkint,
icrnl,opost,tab3,
onlcr,isig,icanon,
echo,echoe,echok,
echoctl,echoke,
imaxbel,iexten]
[hupcl,cread,echoe,
cs8,ixon,ixoff]
[]
[available]
[16]
[3]
[ldterm,tioc]
[none]
[none]
[sbcs]
SystemGuard Remote Operation Configuration
C-1