IBM R30 Operator's Manual page 256

597
598
599
600
602
603
604
605
606
607
608
609
610
611
612
614
615
616
617
618
619
620
622
77c
700
701
702
703
704
705
706
707
708
710
711
712
713
714
715
720
721
E-8
Operator Guide
OCS software being configured.
OCS hosts being configured during system reboot.
Configuring FDDI data link control.
Starting network boot portion of /sbin/rc.boot
Configuring network parent devices.
/usr/lib/methods/defsys, /usr/lib/methods/cfgsys, or
/usr/lib/methods/cfgbus failed.
Configuring physical network boot device.
Configuration of physical network boot device failed.
Running /usr/sbin/ifconfig on logical network boot device.
/usr/sbin/ifconfig failed.
Attempting to retrieve the client.info file with tftp. Note that a flashing 608
indicates multiple attempt(s) to retrieve the client_info file are occurring.
The client.info file does not exist or it is zero length.
Attempting remote mount of NFS file system.
Remote mount of the NFS file system failed.
Accessing remote files; unconfiguring network boot device.
Configuring local paging devices.
Configuration of a local paging device failed.
Converting from diskless to dataless configuration.
Diskless to dataless configuration failed.
Configuring remote (NFS) paging devices.
Configuration of a remote (NFS) paging device failed.
Updating special device files and ODM in permanent filesystem with data
from boot RAM filesystem.
Boot process configuring for operating system installation.
Progress indicator. A 1.0 GB 16-bit SCSI disk drive being identified or
configured.
Progress indicator. A 1.1 GB 8-bit SCSI disk drive being identified or
configured.
Progress indicator. A 1.1 GB 16-bit SCSI disk drive is being identified or
configured.
Progress indicator. A 1.1 GB 16-bit differential SCSI disk drive is being
identified or configured.
Progress indicator. A 2.2 GB 8-bit SCSI disk drive is being identified or
configured.
Progress indicator. A 2.2 GB 16-bit SCSI disk drive is being identified or
configured.
The configuration method for the 2.2 GB 16-bit differential SCSI disk drive is
being run. If an irrecoverable error occurs, the system halts.
Progress indicator. A 4.5 GB 16-bit SCSI disk drive is being identified or
configured.
Progress indicator. A 4.5 GB 16-bit differential SCSI disk drive is being
identified or configured.
Progress indicator. A L2 cache is being identified or configured.
POWER GXT150M graphics adapter being identified or configured.
Unknown adapter being identified or configured.
Graphics slot bus configuration is executing.
The IBM ARTIC960 device is being configured.
A video capture adapter is being configured.
The Ultimedia Services audio adapter is being configured. This LED
displays briefly on the panel.
Unknown read/write optical drive type being configured.
Unknown disk or SCSI device being identified or configured.