IBM R30 Operator's Manual page 253

Information is being displayed on the display console.
260
No supported local system display adapter was found.
261
Keyboard not detected as being connected to the system's keyboard port.
262
Attempting a Normal mode IPL from adapter feature ROM specified in the
263
NVRAM Device List.
Stalled state - the system is unable to IPL.
269
Mouse and Mouse port POST.
271
Tablet Port POST.
272
Auto Token-Ring LANstreamer MC 32 Adapter
277
Video ROM scan POST.
278
FDDI POST.
279
3com Ethernet POST.
280
Keyboard POST executing.
281
Parallel port POST executing.
282
Serial port POST executing.
283
POWER Gt1 graphics adapter POST executing.
284
POWER Gt3 graphics adapter POST executing.
285
Token-Ring adapter POST executing.
286
Ethernet adapter POST executing.
287
Adapter card slots being queried.
288
POWER GT0 Display Adapter POST.
289
IOCC POST error (irrecoverable).
290
Standard I/O POST running.
291
SCSI POST running.
292
7012 DBA disk POST running.
293
IOCC bad TCW SIMM in slot location J being tested.
294
Graphics Display adapter POST, color or grayscale.
295
ROM scan POST.
296
System model number does not compare between OCS and ROS
297
(irrecoverable).
Attempting a software IPL.
298
IPL ROM passed control to the loaded program code.
299
Flash Utility ROM test failed or checkstop occurred (irrecoverable).
301
Flash Utility ROM: User prompt, move the key to the service position in
302
order to perform an optional Flash Update. LED 302 only appears if the key
switch is in the secure position. This signals the user that a Flash Update
may be initiated by moving the key switch to the service position. If the key
is moved to the service position then LED 303 is displayed, this signals the
user to press the reset button and select optional Flash Update.
Flash Utility ROM: User prompt, press the reset button in order to perform
303
an optional Flash Update. LED 302 only appears if the key switch is in the
secure position. This signals the user that a Flash Update may be initiated
by moving the key switch to the service position. If the key is moved to the
service position LED 303 is displayed, this signals the user to press the
reset button and select optional Flash Update.
Flash Utility ROM IOCC POST error (irrecoverable).
304
Flash Utility ROM standard I/O POST running.
305
Flash Utility ROM is attempting IPL from Flash Update media device.
306
Flash Utility ROM system model number does not compare between OCS
307
and ROM (irrecoverable).
Flash Utility ROM: IOCC TCW memory is being tested.
308
Flash Utility ROM passed control to a Flash Update Boot Image.
309
Flash Utility ROM CRC comparison error (irrecoverable).
311
Operator Panel Display Numbers
E-5