When the Ethernet service aid is executed, one of the following messages is returned:
No errors occurred.
An adapter error occurred.
A transmit time–out occurred.
A transmit error occurred.
A receive time–out occurred.
A receive error occurred.
A system error occurred.
Receive and transmit data did not match.
An error occurred that could not be identified.
The configuration indicates that there are no Ethernet adapters in this system unit.
Another application is currently using the adapter.
The resource could not be configured.
Service Hints Service Aid
This service aid reads and displays the information in the CEREADME file from the
diagnostics source (diskettes, disk, or CD–ROM). This file contains information that is not in
the publications for this version of the diagnostics. It also contains information about using
this particular version of diagnostics.
Use the Enter key to page forward through the information or the – (dash) and Enter keys to
page backward through the file.
SSA Service Aid
This service aid provides tools for diagnosing and resolving problems on SSA attached
devices. The following tools are provided:
Set Service Mode
Format and Certify Disk
Trace Service Aid
This service aid provides a tool for doing a Trace Dump on the Serial Disk subsystem. It
provides a means of doing a trace and a means to look at the trace data. The service aid is
only supported in 2.x version of diagnostics.
Using the Service Aids