Download Print this page


3. Plug all drawer power cords into the outlets on the PDB.
4. Close the rear door of the rack.
5. Switch on power to all drawers connected to the PDB.
6. Set the key mode switch to the Normal position.
Note: Before setting the Power button to on, wait for the operator panel display to display
the word "Stand-By."
7. Set the Power button to on (button pushed in).
Key Mode Switch
Operator Guide


   Related Manuals for IBM R30

This manual also for:

R40, R50

Comments to this Manuals

Symbols: 0
Latest comments: