Modifying The Electronic Mode Switch From Service Line Flag; Systemguard Maintenance Menu; Aix Diag Command - IBM R30 Operator's Manual

Modifying the Electronic Mode Switch from Service Line Flag

This flag can be changed under SystemGuard using the maintenance menu, or under AIX
using the diag command.

SystemGuard Maintenance Menu

Starting from the main maintenance menu:
1. Enter 8 to set parameters.
2. Enter 4 for miscellaneous parameters.
3. Enter 9 to change the Electronic Mode Switch from Service Line flag.

AIX Diag Command

Starting from the Service Aids Selection menu:
1. Select the BUMP Service Aids option.
2. Select the Display or Change Flags and Configuration option.
3. Select the Change Diagnostic Flags option.
4. Select the Electronic Mode Switch from Service Line option.
5. Supply a new flag value (0 or 1).
B-6
Operator Guide