IBM R30 Operator's Manual page 255

The configuration manager is unable to update ODM data (irrecoverable
529
error).
The program savebase returned an error.
530
The configuration manager is unable to access the PdAt object class
531
(irrecoverable error).
There is not enough memory to continue (malloc failure); irrecoverable
532
error.
The configuration manager could not find a configure method for a device.
533
The configuration manager is unable to acquire database lock
534
(irrecoverable error).
HIPPI diagnostics interface driver being configured.
535
The configuration manager encountered more than one sequence rule
536
specified in the same phase (irrecoverable error).
The configuration manager encountered an error when invoking the
537
program in the sequence rule.
The configuration manager is going to invoke a configuration method.
538
The configuration method has terminated, and control has returned to the
539
configuration manager.
IPL vary-on is running.
551
IPL varyon failed.
552
IPL phase 1 is complete.
553
Unable to define NFS swap device during network boot.
554
Unable to create NFS swap device during network boot.
555
Logical Volume Manager encountered error during IPL vary-on.
556
The root filesystem will not mount.
557
There is not enough memory to continue the system IPL.
558
Less than 2 M bytes of good memory are available to load the AIX kernel.
559
Virtual SCSI devices being configured.
570
HIPPI common function device driver being configured.
571
HIPPI IPI-3 master transport driver being configured.
572
HIPPI IPI-3 slave transport driver being configured.
573
HIPPI IPI-3 transport services user interface device driver being configured.
574
A 9570 disk-array driver is being configured.
575
Generic async device driver being configured.
576
Generic SCSI device driver being configured.
577
Generic commo device driver being configured.
578
Device driver being configured for a generic device.
579
HIPPI TCPIP network interface driver being configured.
580
Configuring TCP/IP.
581
Configuring Token-Ring data link control.
582
Configuring an Ethernet data link control.
583
Configuring an IEEE Ethernet data link control.
584
Configuring an SDLC MPQP data link control.
585
Configuring a QLLC X.25 data link control.
586
Configuring a NETBIOS.
587
Configuring a Bisync Read-Write (BSCRW).
588
SCSI target mode device being configured.
589
Diskless remote paging device being configured.
590
Configuring an LVM device driver.
591
Configuring an HFT device driver.
592
Configuring SNA device drivers.
593
Asynchronous I/O being defined or configured.
594
X.31 pseudo-device being configured.
595
SNA DLC/LAPE pseudo-device being configured.
596
Operator Panel Display Numbers
E-7