IBM R30 Operator's Manual page 89

2. Enter 1 to select the slot number. The system displays:
SLOT# [1–7 (Internal Bus) | 1–8 (External Bus) or x: exit]
Enter your choice. The displayed location code is updated.
3. Enter 2 to select the SCSI identification number. The system displays:
SCSI ID [0–F or x: exit]
Enter your choice. The displayed location code is updated.
4. Enter 3 to select the logical unit identification number (LUN ID). The system displays:
LUN ID [0–F (8 bit bus) | 00–1F (16 bit bus) or x: exit]
Enter your choice. The displayed location code is updated.
5. Enter 5 to begin the boot. The system leaves the maintenance environment and boots
from the specified SCSI device.
Another method of changing the SCSI Boot Device location code is to select 4 from the
BOOT FROM SCSI DEVICE menu. This method allows you to change the SLOT #, SCSI
ID, and the LUN ID simultaneously. When you make this selection, the system displays:
ENTER LOCATION CODE
(Drawer – Bus#/Slot# – Connector – SCSI ID/LUN):
Enter the new location code in the form AA–BB–CC–DD , where AA is the drawer
number, BB is the bus and slot number, CC is the connector, and DD is the SCSI
identifier and logical unit identifier.
Enter 5 to begin the boot. The system leaves the maintenance environment and boots from
the specified SCSI device.
3-27
Using SystemGuard