Download Print this page

Advertisement

Execute Test List
This command enables you to run the test list once it is built (and possibly modified). All the
tests in the test list are run one at a time with the selected execution options.
Enter 3 in the OFF-LINE TESTS main menu to run the selected tests.
The following screen displays the selected execution parameters for the test list.
OPTION LIST:
PROCESSOR LIST: Test parameter value
>>> ENTER (CTRL_X) TO INTERRUPT TEST EXECUTION <<<
TEST 0101 Running
.. Bump [01.01.00] DEBUG LINE TEST
TEST 0103 Running
.. Bump [01.03.00] S2 ASL (REM.) TEST
PRESS RETURN TO EXIT:
If the loop option is set, press the Break key to stop test execution. Otherwise, wait for the
tests to finish, and then press the Enter key to exit and return to the previous menu.

Set Parameters

This option under the MAINTENANCE MENU enables you to modify user-settable flags and
parameters.
1. Enter 8 in the MAINTENANCE MENU to select the Parameters Modification option.
2. The following screen is displayed:
SELECT [x:exit] :
The following sections explain each of these options in detail.
3-32
Operator Guide
EXECUTE TEST LIST
SET PARAMETERS
0> POWER–ON COMMAND
1> VOLTAGE MARGINS
2> SET CONFIGURATION
3> PHONE NUMBERS
4> MISCELLANEOUS PARAMETERS

Advertisement

   Related Manuals for IBM R30

This manual also for:

R40, R50

Comments to this Manuals

Symbols: 0
Latest comments: