Installation Options; Installation With Complete Antenna Ring - HBM T10F KF1 Operating Manual

T10F
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com

4.3 Installation options

In principle, there are two options for torque-flange mounting: with antenna
ring complete or disassembled. We recommend fitting in accordance with
chapter 4.3.1. If it is not possible to install in accordance with 4.3.1 (for
example during a subsequent stator change, or when installing with the speed
measuring system), you must dismantle the antenna ring. At this point please
be sure to follow the instructions for assembling the antenna segments (see
"Installing the stator" and "Installing the slotted disc").

4.3.1 Installation with complete antenna ring

1. Install rotor
3. Finish installation of shaft run
B 23.T10F.90 en
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com
2. Install stator
Support supplied by the
customer
4. Install the clamping piece if required.
13
Customised
fastening device
Clamping piece
HBM