9
T10F
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
2
Application
T10F Torque Flanges acquire static and dynamic torque data from static or
rotating shafts and determine rotation speed together with information on the
direction of rotation. Due to their extremely short design they enable very
compact test arrangements to be used. They offer a very wide range of
applications.
In addition to conventional test-rig applications (motor, roller and gear
test-rigs) new solutions are possible for torque measurements partly
integrated into the machines. Here you benefit from the special characteristics
of the T10F Torque Flange:
• Extremely short design due to flange measuring–body
• High permissible dynamic loads
• High permissible transverse forces and bending moments
• Very high torsional stiffness
• No bearings, no slip-rings
Due to their construction without bearings and the contact–free transmission
of excitation voltage and measurement, torque flanges are maintenance–free.
Thus, frictional or thermal effects on the bearings can be excluded.
The torque flanges are supplied for nominal (rated) torques from 50 N⋅m up to
10 kN⋅m. Depending on the nominal torque, maximum speeds of up to
15,000 rpm are permissible.
T10F Torque Flanges are protected from electromagnetic interference. They
have been tested with regard to EMC according to the relevant European
standards, and carry the CE mark.
B 23.T10F.90 en
HBM
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com