Installation Options - HBM T40S7 Mounting Instructions

Mechanical installation
signal (0 V ...+10 V) is present. In the case of the rotational speed measuring
system, an arrow is attached to the stator housing to clearly define the direction
of rotation: if the measurement flange turns in the direction of the arrow, con­
nected HBM measuring amplifiers deliver a positive output signal.
5.4

Installation options

There are basically two options for mounting the torque flange: with or without
dismantling the antenna ring. We recommend mounting as described in
Chapter 5.4.1. If mounting in accordance with Chapter 5.4.1 is not possible,
(e.g. in the case of subsequent stator replacement), you will have to dismantle
the antenna ring. It is essential in this case to comply with the notes on assem­
bling the antenna segments (see Chapter 5.4.2).
T40FM 17
A3276-11.0 HBM: public