HBM T10F KF1 Operating Manual page 22

22
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
Assembly sequence
1. Loosen and remove the upper antenna segment screws.
2. Fasten the clamping piece with the enclosed screws as shown in Fig. 4.4.
It is essential to use the new serrated locking washers.
3. Clamp a suitable supporting element (we recommend a threaded rod of
∅ 3...6 mm diameter) between the upper and lower parts of the clamping
piece and tighten the clamping screws.
Support supplied
by the customer,
e.g. threaded rod
Fig. 4.4: Clamping piece assembly
HBM
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com
Antenna segments
Clamping piece
Serrated locking
washers
T10F
B 23. T10F.90 en