36
T10F
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
7.4.2 Aligning the speed module
If necessary you can check that the speed measuring system is working
correctly.
1. Remove the stator cover.
2. Turn the rotor with at least 2 rpm.
If both control LEDs light during rotation, the speed measuring system is
correctly aligned and fully functional.
Green control LEDs
Fig. 7.5: Control LEDs for the speed measuring system
CAUTION
When closing the stator cover, make sure that the internal connection
cables are in the purpose–designed cable slots and not trapped.
HBM
B 23. T10F.90 en
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com