Clamping Piece Assembly - HBM T10F KF1 Operating Manual

T10F
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com

4.6 Clamping piece assembly

Depending on the operating conditions, the antenna ring may be excited so
that it vibrates. This effect is dependent on
• the speed
• the antenna diameter (depends in turn on the measurement range)
• the construction of the machine foundations
To avoid vibrations, a clamping piece is enclosed with the torque
measurement flange enabling the antenna ring to be supported.
Fig. 4.3: Supporting the antenna ring
B 23.T10F.90 en
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com
Support supplied by the customer
Clamping piece
Antenna ring
21
HBM