Safety Instructions - HBM T10F KF1 Operating Manual

5
T10F
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com

Safety instructions

Appropriate use
The T10F Torque Flange may be used for torque-measurement and directly
related control and regulation tasks only. Any other use is not appropriate.
To ensure safe operation, the transducer may only be used according to the
specifications given in this manual. When using the transducer, the legal and
safety regulations for the respective application must also be observed. The
same applies if accessories are used.
The transducer is not a safety device in accordance with the regulations for
appropriate use. For correct and safe operation of this transducer it is
essential to ensure technically correct transportation, storage, installation and
fitting, and to operate all equipment with care.
General dangers in the case of non–observance of the safety
instructions
The transducer complies with the state of the art and is operationally reliable.
If the transducer is used and operated inappropriately by untrained personnel,
residual dangers may arise.
Anyone responsible for installing, operating, maintaining or repairing this
transducer must be sure to have read and understood the operating manual
and in particular the notes on safety.
Residual dangers
The scope of performance and supply of this transducer covers only part of
the torque measurement technology. In addition, those involved in planning,
constructing and operating the safety engineering aspects of torque
measurement technology must design, produce and take responsibility for
such measures in order to minimise potential residual dangers. Prevailing
regulations must be complied with at all times. There must be a clear
reference to the residual dangers connected with measurement technology.
B 23.T10F.90 en HBM
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com