HBM T10F KF1 Operating Manual page 42

42
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
• The maximum permissible amplitude of vibration (peak-to-peak) may be
160 % (at nominal torque 50 N⋅m=320 %, 10 kN⋅m=120 %) of the T10F's
nominal torque, even with alternating load. The amplitude must be within
the loading range defined by –M
(at 50 N⋅m: –2
are being run through.
Nominal (rated) torque M
+M
nom
90
100 %
0
70
–M 100 %
nom
Fig. 8.1: Permissible dynamic loading
HBM
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:szss20@163.com
M +2 M ). This also applies when resonating points
...
@ @
nom nom
in %
nom
and +M
nom nom
T10F
160 %
(320 %, 120 %) M
nom
amplitude of vibration
B 23. T10F.90 en