Concluding Steps; Removing The Irmc Microsd Card; Preliminary Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Figure 211: Installing the iRMC microSD card
Ê With the label facing up, insert the iRMC microSD card into the microSD
card slot (1) until it locks in place (2).
I
The onboard position of the microSD card slot can be found in section
"Connectors and indicators on the system board" on page

14.6.1.3 Concluding steps

Ê Install the riser module 1 as described in section
on page 68.
"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê

14.6.2 Removing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers

14.6.2.1 Preliminary steps

"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
RX1330 M3
Upgrade and Maintenance Manual
System board and components
"Installing a riser module"
Hardware: 5 minutes
324.
299