Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Ê If applicable, install the TFM as described in section
on page 208.
Ê Connect the FBU adapter cable to the TFM as described in section
"Installing the new TFM" on page
Ê Install the RAID controller with the TFM as described in section
expansion card" on page
Figure 136: Routing the FBU cable
Ê Route the FBU cable as shown in the figure.
9.5.1.4

Concluding steps

"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
"Updating expansion card firmware" on page 82
Ê
RX1330 M3
208.
197.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing the new TFM"
"Installing an
217