Switching On The Id Indicator - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Basic software procedures
5.1.6

Switching on the ID indicator

When working in a datacenter environment or a server room, switch on the ID
indicator on the front and rear connector panels of the server for easy
identification.
I
For further information, refer to section
page 50 or to the "ServerView Suite Local Service Concept (LSC)" and
"Integrated Remote Management Controller" user guides.
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch on the system identification
LEDs.
I
For further information, refer to section
Using the iRMC web frontend
Ê Enter the ServerView iRMC web frontend.
Ê Under System Overview, click Identify LED On to switch on the ID indicators.
Using ServerView Operations Manager
Ê In ServerView Operations Manager Single System View press the Locate
button in the title bar to switch on the ID indicators.
78 Upgrade and Maintenance Manual
"Locating the defective server" on
"Server front" on page 328.
RX1330 M3