Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual page 309

"Verifying the system time settings" on page 91
Ê
"Updating or recovering the system board BIOS and iRMC" on page 79
Ê
Ê If applicable, activate TPM functionality in the system BIOS under Security >
TPM (Security Chip) Setting > Security Chip. For more information, refer to the
corresponding BIOS Setup Utility reference manual.
"Verifying system information backup / restore" on page 81
Ê
Ê If customer BIOS settings are not restored automatically, please change the
settings manually (using the information collected during "preliminary
steps"). If you couldn't determine the BIOS version, ask the customer to
reconfigure all BIOS settings and password.
"Looking up changed MAC / WWN addresses" on page 97
Ê
"Updating the NIC configuration file in a Linux and VMware environment" on
Ê
page 94
"Resuming BitLocker functionality" on page 95
Ê
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer. For further information, please refer to section
network settings recovery" on page
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing the system board" on page 100
RX1330 M3
Upgrade and Maintenance Manual
System board and components
303.
"Note on
309