Table of Contents
Advertisement
4.2
Shutting down the server
V
CAUTION!
For further safety information, please refer to chapter
information" on page
I
This step is only required when upgrading or replacing non-hot plug
components.
Ê Inform the system administrator that the server will be shut down and put
offline.
Ê Terminate all applications.
Ê Perform the required procedures described in the preliminary steps of each
upgrade or maintenance task.
Ê Shut down the server.
I
If the system is running an ACPI-compliant operating system,
pressing the On/Off button will perform a graceful shutdown.
Ê Switch on the ID indicator on the front and rear connector panels of the
server as described in section
RX1330 M3
35.
"Locating the defective server" on page
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
50.
53
Advertisement
Table of Contents
