Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Figure 82: Connecting power cable to the HDD backplane
Ê Connect the power cable to the HDD backplane.
7.2.9.6

Concluding steps

Ê Insert all HDD/SSD modules, see section
module" on page
I
Make sure that you reinstall the HDD/SSD module in the bay it was
located before the HDD backplane replacement.
"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
162
145.
Upgrade and Maintenance Manual
"Installing a 2.5-inch HDD/SSD
RX1330 M3