8.2
Replacing a defective fan module
Field Replaceable Unit
(FRU)
Tools: tool-less
8.2.1
Preliminary steps
"Locating the defective server" on page 50
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
"Locating the defective component" on page 51
Ê
8.2.2
Removing the defective fan module
Figure 97: Disconnecting the fan cable
Ê Disconnect the fan cable of the fan module from the system board.
Ê Lift off the fan module upward about 2 cm.
To do this, press up the four rubber pins (A).
RX1330 M3
Upgrade and Maintenance Manual
Hardware: 10 minutes
Fans
181