Replacing The 3.5-Inch Hdd Backplane; Preliminary Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

7.3.5

Replacing the 3.5-inch HDD backplane

Field Replaceable Unit
(FRU)
Tools: tool-less
7.3.5.1

Preliminary steps

"Locating the defective server" on page 50
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Release all HDD modules and pull them out a few centimeters, see section
"Removing a 3.5-inch HDD module" on page 172
I
The HDD modules need not to be removed. But if you want to remove
them nevertheless, check if all HDD modules are uniquely identified
so that you can reinsert them into their original bays.
RX1330 M3
Hard disk drive (HDD) / solid state drive (SSD)
Upgrade and Maintenance Manual
Hardware: 10 minutes
175