Indicator On Hot-Plug Psus (Slide-In Unit) - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Appendix

16.2.3.3 Indicator on hot-plug PSUs (slide-in unit)

Figure 245: Indicator on the hot-plug PSUs
Pos. Indicator
PSU status
1
indicator
338
Status Description
green The server is switched off, but mains
flashing voltage is present (standby mode).
The server is switched on and operating
green on
properly.
An overload has been detected. The
orange
PSU is still running, but failure might be
flashing
imminent.
An PSU failure has been detected.
Possible causes:
orange on
– Over/under voltage
– Overheating
– Fan failure
Upgrade and Maintenance Manual
RX1330 M3