Removing An Expansion Card; Preliminary Steps; Removing The Expansion Card - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

9.4.2

Removing an expansion card

Upgrade and Repair Unit
(URU)
Tools: tool-less
9.4.2.1

Preliminary steps

"Suspending BitLocker functionality" on page 71
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the corresponding riser module as described in section
a riser module" on page
9.4.2.2

Removing the expansion card

Ê If necessary, disconnect the cables from the expansion card.
Figure 116: Removing the expansion card - example riser module 1
Ê Pull out the expansion card from the riser card slot.
RX1330 M3
66.
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
"Removing
199