Preliminary Steps; Removing The Defective 3.5-Inch Hdd Module; Installing The New 3.5-Inch Hdd Module; Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.3.4.1

Preliminary steps

"Locating the defective server" on page 50
Ê
"Locating the defective component" on page 51
Ê
7.3.4.2

Removing the defective 3.5-inch HDD module

Ê Remove the HDD module as described in section
HDD module" on page
Ê If applicable, remove the HDD from the installation frame as described in
section "Handling HDDs or SSDs without installation frame" on page
7.3.4.3

Installing the new 3.5-inch HDD module

Ê If applicable, install the HDD in the installation frame as described in section
"Handling HDDs or SSDs without installation frame" on page
Ê Install the HDD module as described in section
module" on page
7.3.4.4

Concluding steps

"Performing a RAID array rebuild" on page 96
Ê
174
172.
170.
Upgrade and Maintenance Manual
"Removing a 3.5-inch
135.
"Installing a 3.5-inch HDD
135.
RX1330 M3