System board and components
14.6
iRMC microSD card
I
The iRMC microSD card is necessary for using the Embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web frontend.
For further information, please refer to the "ServerView embedded
Lifecycle Management (eLCM)" user guide.
14.6.1 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Tools: tool-less
14.6.1.1 Preliminary steps
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the riser module 1 as described in section
module" on page
14.6.1.2 Installing the iRMC microSD card
Figure 210: iRMC microSD card
298
66.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing a riser
RX1330 M3