Installing The Riser Card; Concluding Steps - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

9.4.4.3

Installing the riser card

Figure 119: Installing the riser card - example riser module 1
Ê Insert the riser card (1).
Ê Fasten the riser card with two screws (2).
Ê Install the expansion card as described in section
card" on page
9.4.4.4

Concluding steps

Ê Install the corresponding riser module as described in section
riser module" on page
"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
RX1330 M3
198.
68.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing the expansion
"Installing a
205