7.2
2.5-inch HDD/SSD configurations
7.2.1
Equipping the 2.5-inch HDDs/SSDs
– SSDs are always equipped before installing HDDs.
– If only one HDD/SSD module is installed, the HDD/SSD module will be
installed in position 1. Free bays must be equipped with a dummy module.
7.2.2
Configuration with up to four HDD/SSD modules
Figure 59: Configuration with up to four 2.5-inch HDDs/SSDs
The HDD/SSD numbering as listed in the ServerView RAID Manager:
Position
Logical drive number ServerView RAID Manager display name
[0]
[1]
[2]
[3]
RX1330 M3
Hard disk drive (HDD) / solid state drive (SSD)
0
Vendor Product (0)
1
Vendor Product (1)
2
Vendor Product (2)
3
Vendor Product (3)
Upgrade and Maintenance Manual
141