Inch Hdd Configurations; Equipping The 3.5-Inch Hdds - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.3

3.5-inch HDD configurations

7.3.1

Equipping the 3.5-inch HDDs

– If only one HDD module is installed, the HDD module will be installed in the
left bay (seen from the front) and dummy modules must be installed in the
free bays.
– Installing different capacities, install the biggest capacity first.
– Installing different rotating speed, install the fastest rotating speed first.
Figure 88: Configuration with up to four 3.5-inch HDDs
The HDD/SSD numbering as listed in the ServerView RAID Manager:
Position Logical drive number ServerView RAID Manager display name
[0]
[1]
[2]
[3]
168
0 Vendor Product (0)
1 Vendor Product (1)
2 Vendor Product (2)
3 Vendor Product (3)
Upgrade and Maintenance Manual
RX1330 M3