Connecting Label Printer Via Rs-232 Interface - QuickLabel QL-60 User Manual

Connecting Label Printer to Computer
•
•
•
•
A printer driver must be installed if a USB interface will be used for connection. The printer
driver for your unit is found on the "Installer DVD" which is included in the delivery or on
QuickLabel.com.
1) Switch label printer off.
2) Connect computer and label printer with an A-B cable.
3) Switch computer on.
4) Place the "Installer DVD" in the DVD drive.
5) Exit all programs currently running.
6) Switch printer on.
7) Follow the on-screen instructions. After successful installation, an icon for the label printer
8) Click icon in "Printer" system folder and edit printer settings if necessary.

Connecting Label Printer via RS-232 interface

Table 17: Pin assignment of the RS-232 interface
1
2
3
4
5
6
7
8
9
1) Connect the 9-pin socket to the matching port of the computer.
2) Install the Windows Printer Driver from the DVD included in the delivery of the printer.
72
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
The Windows Installation Wizard is started automatically.
appears in the Windows "Printer" system folder.
Pin
CD
TxD
RxD
DTR
GND
DSR
RTS
CTS
RI
Designation Function
Carrier Detect
Transmit Data
Receive Data
Data Terminal Ready (not used)
Ground
Data Set Ready (not used)
Request to Send
Clear to Send
Ring Indication (not used)
QL-30/60 User Guide