Table of Contents
Advertisement
Reset Passwords
The function Reset passwords allows you to reset all passwords for the network services to the
default values.
1) Start menu.
2) Select Extras.
3) Select Reset passwords.
4) Select Continue. The passwords will be reset and printer returns to the Extras menu.
Table 42: Default passwords
Web interface access
FTP printing
FTP access to storage
devices
FTP firmware update
Web service
Cleaning Interval
With the parameter Cleaning interval an interval for the printhead cleaning can be set in steps
of 100 m media passage.
If the set length of the medium (label strip, transfer ribbon) has passed the printhead and an
error occurs in the flow of the medium (e.g. label end, transfer ribbon end), the Clean printhead!
message appears in the display.
The error message for the error which occurred is not displayed until the Clean printhead!
message is acknowledged. As long as no errors occur in the medium flow, no messages are
displayed and the print job is continued even if the cleaning interval has passed.
1) Start menu.
2) Select Extras.
QL-30/60 User Guide
If the menu is protected via a PIN, a prompt appears in the display. Enter the code number
and confirm it.
The display shows "Reset passwords".
Function
If the menu is protected via a PIN, a prompt appears in the display. Enter the code number
and confirm it.
User name
admin
ftpprint
ftpcard
ftpadmin
soap
Password
admin
print
card
admin
soap
Extras
121
Advertisement
Table of Contents
