Table of Contents
Advertisement
Connecting Label Printer to Computer
7
8
9
Print Services Raw-IP and LPR/LPD in MS Windows
•
•
•
Note: In the delivery status the print services RawIP (Port 9100) and LPD are activated on the
printer.
Adjusting Windows Printer Setting
When the printer driver valid for your Windows version is installed on your computer, Windows
standard applications can be used to edit the label contents and to start the print jobs. To use
the Raw-IP or LPR/LPD print services, the Windows printer settings must be adjusted:
1) Open the folder containing the printers via Start > Settings > Printers.
2) Right-click the icon of the label printer.
3) Select "Properties" in the pop-up menu.
4) Open the "Details" or "Connections" tab.
5) Select the Raw-IP or LPR connection.
6) Click OK.
Connecting Label Printer via Ethernet Interface
To connect the label printer to a network jack, a patch cable with an RJ45 plug for 10 Base T
or 100 Base T is required.
Attention: Use a shielded cable to connect the printer to the network.
•
•
70
#
Serial RS-232 port
I/O interface (Option)
USB host port for keyboard, scanner, USB memory stick, Bluetooth adapter or
service key
Install a standard TCP/IP port as additional port for printing.
During installation of the new port choose between "Raw" and "LPR"
Raw-IP: Enter the same port address in the printer which you have selected during
installation.
A pop-up menu appears.
This tab contains, among other things, the connections which were also set up when the
print services were installed. The names of these connections depend on the installation
tool used.
Connect computer and label printer with a suitable cable.
Make the settings for operation of the Ethernet interface.
Description
See "Interfaces" on page 87.
QL-30/60 User Guide
Advertisement
Table of Contents
