Reflective Mark Dimensions - QuickLabel QL-60 User Manual

Reflective Mark Dimensions

QL-30/30P
QL-60/60P
QL-30M/30MP
QL-60M/60MP
Figure 23: Reflective mark dimensions
Table 15: Reflective mark dimensions
A
AZ
L
M
XL
XM
Z
•
•
•
•
QL-30/60 User Guide
Labels with
Dim.
Label distance
Distance between print zones
Width of reflective mark
Height of reflective mark
Distance mark - material edge
Distance mark - middle of paper track
Distance virtual label front edge - actual label front edge
Adjust software settings
Reflective marks must be on the back side of the material (liner).
Label sensor for reflective marks on the top side on request.
Specification is valid for black marks.
Recognition of colored marks may fail. Preliminary tests are needed.
marks
virtual label front edge
virtual label front edge
Designation
Endless material with
Dim. in mm
> 2
> 2
> 5
3 - 10
5 - 60
-55 - ±0
0 up to A
recomm. : 0
Media
marks
63