QuickLabel QL-60 User Manual page 90

Configuration
Table 29: Parameters of the Setup > Interfaces > Network services menu (Continued)
RS-232
Table 30: Parameters of the Setup > Interfaces > RS-232 menu
I/O
Table 31: Parameters of the Setup > Interfaces > I/O menu
90
Icon Parameter
Zeroconf
Icon Parameter
Baud rate
Handshake
Icon Parameter
START mode
Meaning
Activation of the auto-configuring
Zeroconf method for ad-hoc networks
Meaning
Speed (in Baud) of data transfer
Data transfer protocol
Meaning
Configuration of the I/O signal START
• Edge: A label will be printed by
switching on 24V between START
and GND_EXT.
• Level: In Rewind mode labels are
printed as long as 24V are switched
on between START and GND_EXT.
In Peel-off mode a label will be printed
after receiving the signal LBLREM as
long as 24V are switched on between
START and GND_EXT.
Default
Off
Default
115.200
RTS/CTS
Default
Edge
QL-30/60 User Guide