Solution Examples; Peeling-Off On Demand With Present Sensor Ps800 / Ps900 - QuickLabel QL-60 User Manual

Figure 48: Connecting outputs

Solution Examples

Peeling-off on Demand with Present Sensor PS800 / PS900

In the standard peel-off mode a label will be printed immediately after the previous label has
been taken from the peel position.
Using the I/O interface the print of the next label can be triggered by an external signal.
Requirements:
•
•
•
Operation:
1) Send a print job.
2) Activate START.
3) Remove the label.
QL-30/60 User Guide
Operation with Present Sensor PS800 or PS900
External circuit as shown in Figure 49 / Figure 50
Setting Printing > Print on Demand = "On".
The first label will be printed and transported to the peel position.
Pin 20 P24_EXT
Pin 3 -
Pin 4 FEEDON
Pin 5 -
Pin 9 JOBRDY
Pin 10 READY
Pin 15 RIBWARN
Pin 21 PEELPOS
Pin 22 ERROR
Pin 25 GND_EXT
I/O Interface
131