Cutting - QuickLabel QL-60 User Manual

Configuration
Table 23: Parameters of the Setup > Tearing-off menu

Cutting

Note: If cutter is not installed, access only with service key inserted.
•
•
Table 24: Parameters of the Setup > Cutting menu
84
Icon Parameter
Tear-off mode
Tear-off position
Start menu.
Select Setup > Cutting.
Icon Parameter
Cut position
Perforation level
Meaning
Positioning the label medium for tearing
off at the tear-off plate.
• On: Additional advancement of the
label medium which positions the
label gap after the last printed label at
the dispense plate.
• Off: Label advance stops once the last
label has fully passed the print line.
Shifting of the tear-off position in the
direction of media flow. With positive
values, the label strip is transported
farther out of the printer.
Meaning
Offset of the cut position relative to the
rear label edge.
The setting can also be adjusted by the
software.
The settings of configuration and
software are added together.
With perforation cutter only
Setting of the perforation depth.
The setting can also be adjusted by the
software.
The settings of configuration and
software are added together.
Default
On
0.0 mm
Default
0.0 mm
0
QL-30/60 User Guide