Table of Contents
Advertisement
Pausing and Continuing a Print Job
In the standard operation without a peripheral device connected all labels of a print job will be
printed without interruption.
To adapt the label output of the printer (e.g. to an external device with a lower transport speed)
the print job can be interrupted.
Requirements:
•
•
•
Operation:
1) Send a print job.
2) Activate the signal PAUSE.
3) Deactivate the signal PAUSE.
QL-30/60 User Guide
Operation without peripheral device.
External circuit as shown in Figure 59 / Figure 60
Setting Printing > Print on Demand = "Off".
The labels of the print job will be printed one after the other.
After completion of the current label the print job will be paused.
I/O Interface
141
Advertisement
Table of Contents
