Table of Contents
Advertisement
15
Firmware Update
Note: The firmware file can be obtained from the internet.
Note: Access only with external storage device!
1) Copy the firmware file to the "misc" directory of the storage device. This can be done on a
2) Insert the prepared storage device into the printer.
3) Start menu.
4) Select Extras.
5) Select Firmware update.
6) Select a file and confirm.
7) The selected firmware file is copied. A progress indicator is displayed while the firmware is
Note: The firmware update also can be done via FTP printer management.
Firmware Update" on page 144.
Save Settings
With the Save settings function the printer configuration can be saved to a storage device.
1) Start menu.
2) Select Extras.
3) Select Save settings.
4) Select the external storage device.
5) Enter a file name.
QL-30/60 User Guide
computer or via FTP on the printer.
If the menu is protected via a PIN, a prompt appears in the display. Enter the code number
and confirm it.
The display shows the selection of external storage devices and the firmware files stored
on the devices.
being copied. After completion the printer will be re-started.
If the menu is protected via a PIN, a prompt appears in the display. Enter the code number
and confirm it.
The predefined name is composed of the identifier "gui", date, clock time and the suffix
".xml", but may also be altered.
Extras
See "FTP
119
Advertisement
Table of Contents
