Table of Contents
Advertisement
Storage Devices
8) Select destination device and folder.
9) Confirm the selection.
10) Select Continue to return to the Storage menu.
Format Storage
The Format function can be used to delete all data from a storage device. This reformats the
storage device. You can also use the Format function if the Unknown card error message
appears when using the device.
1) Insert storage device.
2) Start menu.
3) Select Storage > Format storage.
4) Select a storage device and confirm the selection.
5) Select Continue. The storage device will be formatted.
Default Storage
With the parameter Default storage Definition the storage device can be defined, which can be
operated via interfaces and FTP printer management.
At functions started from the printer display all storage devices are accessible, but the default
storage will be offered first.
1) Start menu.
2) Select Storage > Default storage.
3) Select a storage device and confirm the selection.
148
The files are copied. The display shows the message "Copied ... file(s) to [Destination]"
If the function is protected via a PIN, a prompt appears in the display. Enter the code
number and confirm with OK. The display shows the selection of storage devices.
The display shows the message All data on the selected device will be lost.
Do not remove the device from the printer during the deleting procedure. The printer returns
to the Storage menu.
The display shows the selection of storage devices.
QL-30/60 User Guide
Advertisement
Table of Contents
