Ribbon; Tearing-Off - QuickLabel QL-60 User Manual

Table 21: Parameters of the Setup > Labels menu (Continued)

Ribbon

•
•
Table 22: Parameters of the Setup > Ribbon menu

Tearing-off

•
•
QL-30/60 User Guide
Icon Parameter
Extrapolate labels
Start menu.
Select Setup > Ribbon.
Icon Parameter
Transfer print
Warn level ribbon
Pause on warning
Start menu.
Select Setup > Tearing-off.
Meaning
The positions of the labels which are
between the label sensor and the
printhead are calculated from the first
label recognized by the sensor and the
programmed label distance. That way
those labels can be printed although the
printhead previously was open.
Meaning
• On: Sensor for monitoring the transfer
ribbon is activated.
• Off: Sensor for monitoring the transfer
ribbon is not activated.
The setting can be overwritten for each
print job via software. The basic setting
is not changed by this.
Threshold diameter (32–74 mm) of the
ribbon supply roll, if the value is
undershot the "ribbon low" message will
be activated
The print job will be interrupted when the
"ribbon low" message appears
Configuration
Default
Off
Default
On
Off
Off
83