Printer Not Operating Correctly; Power Off; Printer Does Not Start Or Printer Stops During Print Jobs - QuickLabel Kiaro! 200 User Manual

Printer Not Operating Correctly

Kiaro! 200 User Guide

Power Off

Check Point
Main power switch is at the off position.
Printer power cord unplugged.
Power supply not providing power.

Printer Does Not Start or Printer Stops During Print Jobs

Check Point
Upper unit, ink tank door, or mainte-
nance cartridge door open.
Printer is not connected to the com-
puter.
Media is not loaded correctly.
The ink tanks are not installed correctly.
The printer driver is not selected on the
computer.
Print data contains an image with a
large capacity.
The printer has been printing for a long
period.
Solution
Press main power switch to the on posi-
tion.
Make sure that the power cord is
plugged in completely.
Connect another device to the power
supply to confirm that the outlet is pro-
viding power. If you cannot restore the
printer to normal operation, contact
QuickLabel Support.
Solution
Close the upper unit, ink tank door, or
maintenance cartridge door and ensure
it is closed tightly.
Check the USB cable and make sure
that it is connected to the printer and the
computer.
Load media correctly.
Check the ink tanks and make sure that
they are installed correctly.
Make sure that the Kiaro! 200 printer is
selected when you start the print job.
If you see the STATUS LED flashing,
this means data is processing. Wait for
the processing to finish.
If the printer prints for a long period the
printhead may overheat. To protect the
printhead, the Status Monitor will display
a printhead overheated message and
stop the print job. Just wait for the print-
head to cool down.
Troubleshooting
101