Table of Contents
Advertisement
Table 36: Parameters of the Setup > Interpreter menu (Continued)
ZPL
•
•
Table 37: Parameters of the Setup > ZPL menu
Configuration via the Web Interface
The parameters accessible via the control panel can also be set via the web interface contained
in the firmware of the printer.
The printer web interface can be accessed with a browser (e.g. Microsoft Internet Explorer,
Mozilla Firefox) with JavaScript activated via the Ethernet interface or the optional WLAN
interface.
Calling Up the Web Interface
Attention: Whenever settings are changed via the web interface you are requested to enter
the user name "admin" and a password. The default value of the password is also "admin". The
password can be changed via the web interface.
1) Start the browser.
QL-30/60 User Guide
Icon
Parameter
LPD
RawIP
Bluetooth
Start menu.
Select Setup > ZPL.
Icon
Parameter
> Printing width
> Label length
Meaning
Choosing between the programming
languages JScript and ZPL for printing
with LPD
Choosing between the programming
languages JScript and ZPL for printing
with RawIP
Choosing between the programming
languages JScript and ZPL for data
transfer via Bluetooth
* only with Bluetooth adapter installed
Meaning
Setting the print width for ZPL
programming
Setting the label length for ZPL
programming
See "Setup Tab" on page 97.
Configuration
Default
JScript
JScript
JScript
Default
100.0 mm
150.0 mm
95
Advertisement
Table of Contents
