Error Messages And Fault Correction - QuickLabel QL-60 User Manual

Fault Correction

Error Messages and Fault Correction

Table 11: Error Messages and Fault Correction
Barcode error
Barcode too big
Buffer overflow
Cutter blocked
Cutter jammed
Device not conn.
File not found
Font not found
Memory overflow
Name exists
54
Error message Cause
Invalid barcode content, e.g.
alphanumeric characters in
a numerical barcode
The barcode is too big for
the allocated area of the
label
The input buffer memory is
full and the computer is still
transmitting data.
Cutter cannot return into its
home position and stays in
an undefined position
No cutter function
The cutter is unable to cut
the labels but is able to
return into its home position
Programming addresses a
non-existent device
Requested file is not on the
card
Error with the selected
download font
Current print job contains
too much information, e.g.
selected font, large graphics
Duplicate usage of field
name in the direct
programming
Remedy
Correct the barcode content.
Reduce the size of the
barcode or move it.
Use data transmission via
protocol (preferably
RTS/CTS).
Switch off the printer.
Remove material. Switch on
the printer. Restart print job.
Change material
Switch the printer off and
then on.
If error recurs call service.
Press Cancel
Change material.
Either connect this device or
correct the programming.
Check the contents of the
card.
Cancel current print job,
change font.
Cancel current print job.
Reduce amount of data to
be printed.
Correct programming
QL-30/60 User Guide