Table of Contents
Advertisement
17
Reset Service Counter
Note: Access only with service key inserted!
The printer has total and service counters.
•
•
The following data is recorded in both counters:
Table 44: Total and service counter data
Operative time
Number of labels
Transfer printing
Thermal printing
1) Insert service key into a USB host interface.
2) Start menu.
3) Select Service > Reset service counter.
4) Select Continue. The data recorded by the service counter is set to the value 0.
The status print can be used to check whether the values were reset.
Calibrate Label Sensor
Note: Access only with service key inserted!
QL-30/60 User Guide
Total counter: The total counter contains the values for the entire service life of the printer
up to now. The values of the total counter are displayed in the Info menu and in the Status
print.
Service counter: The service counter can be reset after more substantial maintenance or
repair work with the service key inserted. Here, it provides information on the printing output
since the last reset. The values of the service counter are displayed in the Status print.
Data
The display shows Reset service counter.
Service Functions
Description
Printer switch-on time
Number of labels printed
Length of medium printed with transfer printing
Length of medium printed with thermal direct printing
125
Advertisement
Table of Contents
