Loading Fanfold Media - QuickLabel QL-60 User Manual

Loading Fanfold Media

6
Figure 12: Feed path of fanfold media
1
2
3
4
5
6
7
8
QL-30/60 User Guide
Turn ring (2) counterclockwise, so that the arrow points to the unlock symbol, and thus
release the margin stop (1).
Move the margin stop(s) (1) in such a position that:
• QL-30, QL-60, QL-30P, QL-60P - the media can pass between the margin stop and the
chassis.
• QL-30M, QL-60M, QL-30MP, QL-60MP - the media can pass between the two margin
stops.
Position media stack (4) behind the printer. Ensure that labels on the strip are visible from
above.
Guide the media strip over the roll retainer (3) to the print unit.
Move the margin stop (1) against the media strip until chassis (5) and margin stop (1) or
both margin stops touch the media strip without clamping or bending it.
Turn ring (2) clockwise, so that the arrow points to the lock symbol, and thus fix the margin
stop (1) on the roll retainer (3).
Insert media strip into printhead.
38.
Set the label sensor.
See "Setting the Label Sensor" on page 39.
See "Inserting the Media Strip into the Printhead" on page
Loading Media
1
2
3
4
5
43