Device List - QuickLabel QL-60 User Manual

The printout can be canceled with the following icon:
Figure 34: Font list
Table 38: Parameters of the Font list
No.
Name
Type
Description

Device List

The Device list function prints out the most important information on hardware components of
the printer and connected devices. The printout occurs using the heat level and print speed
specified in the Setup > Printing menu.
Note: The printout occurs without taking the label gaps into consideration. This is why
continuous media is most suitable for this purpose.
1) Insert printable medium (labels, continuous media) which extends across the entire printing
2) If the printout is to occur using thermal transfer printing, insert transfer ribbon with the
QL-30/60 User Guide
Thu Aug 11 09:44:06 2016
QL-30
Firmware V5.00 (Jul 28, 2016) - #164162031171
No. Name
-1 _DEF1
-2 _DEF2
-3 _DEF3
-4 OCR_A_I
-5 OCR_B
3 BX000003
5 BX000005
596 BX000596
1000 GHEI21M
1010 GARUDA
Name
ID number of the font required for programming (command T).
Name with which the font is saved internally.
Type of font generation. It provides information on the variability of
the font and is important when programming (command T).
Explanations of the font: size, font family. The printout occurs in the
appropriate font.
width.
maximum width.
Font list
Type Description
Bitmap Default Font 12x12 dots
Bitmap Default Font 16x16 dots
Bitmap Default Font 16x32 dots
Bitmap OCR-A Size I
Bitmap OCR-B
TrueType Swiss 721
TrueType Swiss 721 Bold
TrueType Monospace 821
TrueType AR Heiti Medium GB-Mono
TrueType Garuda
Description
Test Functions
105