Installation
Unpacking and Setting-up the Printer
1
2
3
4
5
Installing the WLAN stick
1
2
Figure 4: Installing the WLAN stick
1
2
22
Lift the label printer out of the box.
Check label printer for damage which may have occurred during transport.
Set up the printer on a level surface.
Remove foam transportation safeguards near the printhead.
Check delivery for completeness.
•
Label printer
•
Power cable
•
USB cable
•
WLAN stick
•
Installation software
•
Documentation
Remove the cover (1) with the Allen key (2).
Connect the WLAN stick (4) to the USB interface (3) in the control panel.
3
4
QL-30/60 User Guide